izoSET Thermal Insulation Adhesive
Cement-based, powder polymer-added adhesive mortar for thermal insulation boards.
It is a cement-based, powder polymer-added adhesive mortar developed for thermal insulation boards. It provides strong adhesion and long-lasting bonding.
-
High bonding strength
-
Interior and exterior use
-
Ideal solution for EPS board applications
-
Cement-based
-
High bonding strength
-
Resistant to thermal shocks
-
Suitable for interior and exterior use
-
Thermal insulation board adhesive mortar
-
Exposed concrete, brick, cement-based plaster, and aerated concrete surfaces
You can access the TDS document via the button below.
Advantages
-
Has high bonding strength.
-
Resistant to thermal shocks.
Application Surfaces
-
Interior and exterior facades
-
Exposed concrete
-
Brick
-
Cement-based plaster
-
Aerated concrete
-
Manufacturer's recommendation should be obtained for all other application surfaces.
Application Instructions
-
The surface must be free from dust, dirt, and oil.
-
The product must be mixed with clean water until a lump-free, homogeneous consistency is achieved.
-
It must be applied to the board using the perimeter frame and spot method, or with a notched trowel.
-
After application, the boards must be pressed onto the surface and properly leveled.
Packaging / Consumption
-
It is an adhesive mortar in powder form.
-
Consumption varies depending on surface smoothness and application method.
-
TDS and technical documents can be accessed via the buttons below.